新闻动态

首页 > 新闻动态
塑料井盖模具生产环境和使用
发布人:管理员   发布时间:2022-5-21
在使用塑料井盖模具的时候可以提前进行加工场地的清理,一些细碎的石子或者是泥沙要清理干净,井盖模具的硬度虽然是有着提高

When using the plastic well cover mold, the processing site can be cleaned in advance. Some fine stones or sediment should be cleaned up. Although the hardness of the well cover mold is improved

但是长时间直接放置在地面上进行生产加工,就会造成塑料井盖模具底部磨损情况的加重,还会影响到井盖的成型情况。

However, if it is placed directly on the ground for production and processing for a long time, it will aggravate the wear at the bottom of the plastic well cover mold and affect the forming of the well cover.

为了改善这种情况,预制工厂一般都是会将井盖模具的加工场地与其他模具加工场地进行区分,这样是为了保证好井盖模具的加工状况。

In order to improve this situation, the prefabrication factory will generally distinguish the processing site of well cover mold from other mold processing sites, so as to ensure the processing condition of well cover mold.

                              

塑料材质的井盖模具不用单独进行组装,可以直接从仓库中取出使用,将模具简单擦拭干净后放置在地面上,工人需要将工业机油均匀的涂刷在模具的里面,让内腔更加光滑减少泥浆的粘连

The plastic well cover mold does not need to be assembled separately, but can be directly taken out from the warehouse for use. After the mold is simply wiped and placed on the ground, the workers need to evenly brush the industrial oil inside the mold to make the inner cavity smoother and reduce the adhesion of mud

按照模具的摆放位置慢慢在里面注入一些泥浆等待凝固就可以了,生产的过程中尽量避免井盖模具的移动。

According to the placement position of the mold, slowly inject some mud into it and wait for solidification. Try to avoid the movement of the well cover mold in the process of production.

 

上一篇:没有了